Search
Close this search box.

1-1 Phase Series Online UPS (15-20kVA)

  • High frequency on-line double conversion technology
  • DSP (Digital signal processors)control technology
  • Active power factor correction (APFC), input power factor up to 0.99
  • Output power factor 0.9
  • Wide input voltage range (110 V ~ 300 Vac) and frequency range (40 ~ 70 Hz)
  • Auto sensing frequency
  • 50 / 60 Hz frequency conversion
  • Cold start
  • Rear ventilation design and variable speed fan
  • Effective software and hardware protection
  • Quick and stable charging, 90% capacity restored in 3 h (standard model UPS)
  • Linearderating in low voltage input reducing battery discharging times
  • Settable delayed start when power is restored
  • Advanced battery management (ABM)
  • Multiple functions settable via LCD: output voltage, EOD, auto-start, bypass mode, ECO mode and frequency conversion mode
  • Multi-platform communications: RS232 (standard), USB / RS485 / SNMP / dry contacts (optional)

Available Options

  • OptionalUSB, RS485 card, AS400 dry contacts, SNMP card, SMS alarms, EPO function, and 12 A charger (2/3 kVA only)

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Technical Data” tab_id=”1625838699278-296622a9-7466″][vc_column_text]

MODELEA901PEA902PEA903P
Capacity1 kVA/900 W2 kVA/1800 W3 kVA/2700 W
INPUT
Rated voltage208 / 220 / 230 / 240 Vac
Voltage range110 ~ 176 Vac (linear derating between 50% and 100% load ); 

 

176 ~ 280 Vac (no derating); 280 ~ 300 Vac (derating 50%)

Frequency40 ~ 70 Hz (auto-sensing)
Power factor≥ 0.99
Bypass voltage range-25% ~ +15% (settable)
Total harmonic distortion (THDi)≤ 6%
OUTPUT
Voltage208 / 220 / 230 / 240 Vac (settable via LCD)
Voltage regulation± 1%
Frequency45 ~ 55 Hz or 55 ~ 65 Hz (synchronized range); 50 / 60 Hz ± 0.1 Hz (battery mode)
WaveformSinusoidal
Power factor0.9
Total harmonic distortion (THDv)≤ 2% (linear load), ≤ 5% (non-linear load)
Crest factor3:1
Overload105% ~ 125% for 1 min, 125% ~ 150% for 30 s, > 150% for 300 ms
BATTERIES
DC voltage24 V (S)36 V (S)36 V 

 

(H)

48 V 

 

(S)

72 V 

 

(S)

72 V (H)72 V 

 

(S)

96 V 

 

(S)

96 V (H)
Inbuilt battery2×9 Ah3×7 Ah/4×9 Ah6×7 Ah/6×9 Ah8×7 Ah/
Charging current (max.)1 A6 A1 A6 A1 A6 A
Recharge timeStandard model: 90% capacity restored in 3 hours; 

 

Long time model: depend on the capacity of battery

SYSTEM
Efficiency≥ 90% (Mains mode)≥ 91% (Mains mode)≥ 92% (Mains mode)
≥ 85% (Battery mode)≥ 86% (Battery mode)≥ 87% (Battery mode)
≥ 95% (ECO mode)≥ 96% (ECO mode)≥ 97% (ECO mode)
Transfer timeMains mode to battery mode: 0 ms 

 

Inverter mode to bypass mode: 4 ms (typical)

ProtectionsShort-circuit, overload, overtemperature, battery discharge protection and fan testing protection
CommunicationsRS232 (standard), USB / RS485 / dry contacts / SNMP (optional)
DisplayLCD + LED
StandardsEN 62040-1, EN 62040-2, EN 61000-3-2, EN 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 61000-2-2, IEC 62040-2, IEC 62040-1, IEC 62040-3
OTHERS
Operating temperature0℃ ~ 40℃
Storage temperature-25°C ~ 55°C (without batteries)
Relative Humidity0 ~ 95% (non-condensing)
Altitude≤ 1000 m, derating 1% for each additional 100 m
IP ratingIP 20
Noise level at 1 m≤ 50 dB
Dimensions (W × D × H) (mm)144 × 336 × 214144 × 414 × 214144 × 336 × 214191 × 418 × 335191 × 464 × 335191 × 418 × 335
Packaged dimensions (W × D × H) (mm)232 × 417 × 318230 × 492 × 320232 × 417 × 318318 × 533 × 471320 × 573 × 472318 × 533 × 471
Net weight (kg)9.51361825.810.527.23211
Gross weight (kg)10.514.2719.527.412293412.5
  • Derate capacity to 70% in CUCF mode and to 90% when the output voltage is adjusted to 208 Vac.
  • S means standard model, H means long time model.
  • All specifications subject to change without notice.
  • Custom-made specifications are acceptable.
×