Sine Wave UPS/IPS
Hoodi… Back Up
UTL Hoodi…Back-up is safest combination of UPS and Voltage Stabilizer as it provides Pure Sine Wave Output. It is powered by micro controller digital technology. You can run all appliances altogether including Tube lights, Fans & Computer which eliminates the need of two equipments for similar applications, at your home or office
- Pure sine wave Output
- Maintains battery health
- Any battery option
- Auto overloads resetting
- Built in Stabilizer
Pure Sine Wave Output
Prevent crashes in computers, weird print outs and glitches in monitors with clean/distortion free pure sine wave output from UTL’s HOODI…BACK-UP . Now run inductive appliances much quieter and cooler similar to how they run on utility supplied electricity
Maintains Battery Health
The HOODI…BACK-UP provides the battery installed to it with a constant boost charging current until its voltage reaches 14.2V and the float current maintains this voltage above 13V. Thus reducing the float current to zero, ultimately resulting in much enhanced battery life keeping it fully charged simultaneously
Any Battery Option
The HOODI…BACK-UP from the house of UTL has the intelligent feature to recognize the type of battery connected to it, may it be an ordinary battery or a branded one, a tubular battery or a sealed one. No matter what the type is, it auto adjusts the battery’s charging characteristics accordingly. Even those batteries which cease to go over 13.5V after a while of use work flawlessly with UTL’s Hoodi…Back. While the ups’s from other brands overcharge such batteries UTL’s Hoodi…Back-Up on the other hand declares them fully charged at 13.5 volts, thus preventing them from being overcharged. With an option for battery equalization the Hoodi…Back-Up from UTL is a complete package. So, go ahead and install any battery you like
Auto Overload Resetting
UTL’s Combo UPS has the ability to sense the level of load attached to it. When subjected to excessive load the UPS enters a stand-by mode in which it keeps on beeping and sensing the load and then turns itself back ON when it finds the load to be in its specified level of operation, dismissing the need of manual resetting. If the load is not reduced, the UPS then after 7 attempts to turn itself back ON undergoes shutdown
Built in Stabilizer
A built in stabilizer in the UTL’s HOODI…BACK-UP work both as a UPS and an inverter, eliminating the need of buying a separate stabilizer for regulation of the AC input. Even if the AC Mains drop down to only a hundred volts the charging current remains full.
TECHNICAL SPECIFICATIONS | |||
Input Parameters | |||
Model No | SC-2000 | SC-3000 | SC-5000 |
Rating | 2000VA | 3000VA | 5000VA |
DC Voltage | 24Vdc | 36Vdc | 96Vdc |
Nominal Input voltage | 230Vac | ||
Low Cut voltage | 140Vac ± 10Vac | ||
High Cut voltage | 270Vac ± 10Vac | ||
Frequency | 50Hz with phase Sync | ||
Charger Topology | Boost MOSFET Based | ||
Output parameters in inverter mode | |||
Output Voltage | 200-250Vac | ||
Frequency | 50Hz ± 0.5 % | ||
Waveform | Sine wave | ||
Voltage Harmonic | ˂ 3% | ||
Overload Capacity | Wide / inverter mode ≥ 110 % 7th times auto reset, 8th times shut down | ||
Narrow / UPS mode ≥ 110 % System shutdown in 1st time Manual reset | |||
Battery Type | Lead acid/ Sealed Maintenance free/ Tubular type | ||
Audio able warning | |||
Battery Low | Intermitted | ||
Overload | Continuous | ||
Mode change | Single Beep | ||
Indication | |||
LED | #Mains On #Battery Low #Battery Charged #Overload #Mains High#Wide Range #Narrow Range | ||
Others | |||
Transfer time | Narrow / UPS mode ˂ 5ms | ||
Wide / Inverter mode ˂ 50ms | |||
Typical Efficiency | ≥ 80 % | ||
Safety Protection | |||
Overload on Mains | AC Fuse | ||
Reverse Battery Polarity | Fuse on Real panel | ||
Low battery voltage | Automatic Shutdown | ||
Others Protection circuitry | Output short-circuits protection | ||
Others specification | |||
Operating Temperature | 0 °C-40°C | ||
Protection Class | IP 20 |